generor test 11 engine running on hho
another video up, and more to come once I start to compile them. All the following tests were done with the same cell setup, 2 cells at 36 plates 6″x6″, 3/8 hose ran from cell to res, from res to dryer #1, to dryer #2 at engine, and only the last 2″ of tube was reduced to 1/4 tubing, the torch was using a .025 mig tip. Rough synopsis: 1st test setup, removed all metering jets from gasoline carb, routed hho into normal gasoline input, routed crank case vent to manifold vacuum. covered carb …
Translator
By N2H